Keyword search: battery plant ,  lithium battery factory ,  power bank works ,  lifepo4 battery mill ,  Pallet Trucks LiFePO4 Battery,  LiFePO4 Pallet Trucks Battery,  Lithium Pallet Trucks Battery, 

Characteristics Introduction of 3000W Lithium - Iron - Phosphate UPS Power Supply

I. High - performance Lithium - Iron - Phosphate Battery

1. High Energy Density

• In the 3000W UPS power supply, the lithium - iron - phosphate battery exhibits a relatively high energy density. This means that a large amount of electrical energy can be stored in a relatively small volume and with a relatively light weight. Compared with traditional lead - acid batteries, the energy density of lithium - iron - phosphate batteries is usually 2 - 3 times higher. For example, for the same energy storage requirement, the volume of a lithium - iron - phosphate battery may be about half that of a lead - acid battery, which is very advantageous for application scenarios with limited space, such as small - scale data centers or office computer rooms.

2. Long Cycle Life

• The lithium - iron - phosphate material has good chemical stability, enabling the battery of this UPS power supply to have a long cycle life. Generally, the battery of a 3000W lithium - iron - phosphate UPS power supply can be charged and discharged more than 2,000 times, while the cycle life of traditional lead - acid batteries is usually 500 - 1,000 times. A long cycle life not only reduces the frequency of battery replacement but also cuts down the operating cost in long - term use.

3. High Safety

• Lithium - iron - phosphate batteries perform excellently in terms of thermal stability. Its chemical structure makes it less likely to experience thermal runaway under extreme conditions such as high temperature, over - charging, and over - discharging. For example, during the charging process, even if a fault occurs in the charging control circuit resulting in over - charging, the lithium - iron - phosphate battery will not be as prone to catching fire or exploding as some lithium batteries. This is crucial for ensuring the safety of equipment and personnel, especially in places with extremely high safety requirements, such as hospitals and financial data centers.

II. 3000W Power Output Characteristics

1. Stable Power Output

• The 3000W output power can provide stable power support for a variety of equipment. Whether it is servers, network equipment, or office automation equipment, it can meet their power requirements during a mains power interruption. In actual operation, this UPS power supply can instantly switch to the battery - powered mode and maintain a stable 3000W output, ensuring that the equipment operates normally without power fluctuations that could cause equipment restart or data loss.

2. Compatibility with Multiple Loads

• This UPS power supply has good compatibility with different types of loads. It can provide effective power protection for pure resistive loads (such as electric heaters), inductive loads (such as motors), and capacitive loads (such as filter capacitors in some electronic devices). For example, for various loads with a power factor between 0.8 and 1, the 3000W lithium - iron - phosphate UPS power supply can work normally, meet their power requirements, and maintain a stable output voltage and frequency.

III. Efficiency and Environmental Protection Characteristics

1. High Conversion Efficiency

• In terms of electrical energy conversion, the 3000W lithium - iron - phosphate UPS power supply has a relatively high conversion efficiency. Usually, its conversion efficiency can reach more than 90% during normal operation. This means that when converting electrical energy between the mains power and the battery, energy loss can be minimized. In comparison, the conversion efficiency of traditional UPS power supplies may be around 70% - 80%. High conversion efficiency helps to reduce energy consumption and operating costs.

2. Environmental Protection Characteristics

• The lithium - iron - phosphate material itself is a relatively environmentally - friendly battery material. It does not contain heavy metal pollutants such as lead and cadmium, and has a low pollution risk to the environment during the production, use, and end - of - life treatment of the battery. With the increasing global emphasis on environmental protection, these environmental protection characteristics make the 3000W lithium - iron - phosphate UPS power supply more favored in more application scenarios, especially in green data centers and environmentally - friendly enterprises with strict environmental requirements.

IV. Intelligent Management and Monitoring Characteristics

1. Intelligent Battery Management System

• Being equipped with an intelligent battery management system (BMS) is an important feature of the 3000W lithium - iron - phosphate UPS power supply. The BMS can monitor parameters such as battery voltage, current, and temperature in real - time, and manage the balanced charging and discharging of the battery, thus prolonging the service life of the battery. For example, when an abnormal voltage occurs in a single battery cell, the BMS can adjust the charging or discharging strategy in a timely manner to prevent the single - cell battery from being over - charged or over - discharged, thereby ensuring the performance and safety of the entire battery pack.

2. Remote Monitoring Function

• This UPS power supply usually supports the remote monitoring function. Through network connection, users can view the running status of the UPS power supply in real - time on a remote terminal (such as a computer or a mobile phone), including input and output voltages, power, and remaining battery capacity. In case of a fault, the system can also send alarm information to the designated terminal in a timely manner, facilitating maintenance personnel to take measures in time and improving the maintainability and reliability of the equipment.

Lithium Batteries ,Ensure Quality

Our lithium battery production line has a complete and scientific quality management system

Ensure the product quality of lithium batteries

Years of experience in producing lithium batteries

Focus on the production of lithium batteries

WE PROMISE TO MAKE EVERY LITHIUM BATTERY WELL

We have a comprehensive explanation of lithium batteries

QUALIFICATION CERTIFICATE

THE QUALITY OF COMPLIANCE PROVIDES GUARANTEE FOR CUSTOMERS

MULTIPLE QUALIFICATION CERTIFICATES TO ENSURE STABLE PRODUCT QUALITY

Providing customers with professional and assured products is the guarantee of our continuous progress.

Applicable brands of our products