Keyword search: battery plant ,  lithium battery factory ,  power bank works ,  lifepo4 battery mill ,  Pallet Trucks LiFePO4 Battery,  LiFePO4 Pallet Trucks Battery,  Lithium Pallet Trucks Battery, 

1. It is strictly prohibited to operate or place batteries in a state of low power. Low battery (battery voltage drops by 20%) state refers to the battery not being charged in a timely manner after use. In a low power state, the battery is prone to sulfation, and lead sulfate crystals adhere to the electrode plate, blocking the ion channels, causing increased internal resistance, insufficient charging, slow charging, and a decrease in battery capacity. The longer the idle time in a low power state, the more severe the battery damage, until it is scrapped.

2. When the battery is idle and not in use, it should be charged once or twice a month to keep the battery in a healthy state.

3. When not in use for a long time, the battery ground wire should be disconnected.

4. The charging current of the battery should not be too large, and the charging voltage should not be higher than 20% of the battery voltage. It should be charged at a current of 1/20 of the battery capacity for 24 hours continuously.

Try not to charge quickly or with high current (ten hour charging), as this can easily cause the battery to generate high temperatures and even cause the battery electrolyte to boil, affecting its lifespan

Water battery is a type of lead-acid battery. Due to the high liquid content inside the battery, it is commonly referred to as a "water battery". The liquid in a water battery is relatively easy to lose and needs to be replenished frequently, so it is also called a maintainable battery.

This type of battery is commonly used in cars and motorcycles

Maintenance points

Regularly checking the level of electrolyte in the battery and adding electrolyte in a timely manner is the most important daily maintenance step. During the charging and discharging process of a battery, the water in the electrolyte will gradually decrease due to electrolysis and evaporation, resulting in a decrease in the electrolyte level. If not replenished in a timely manner, it may shorten the service life of the battery. Distilled water should be replenished in a timely manner, and pure drinking water should not be used as a substitute. Because pure water contains multiple trace elements, it can have adverse effects on batteries.

Generally, there will be corresponding instructions on the battery cover, teaching you how to check the liquid level through the observation window.

When adding electrolyte, first unscrew the injection bolt on the battery cover, then shake the electrolyte well before adding it to the battery. Note that the electrolyte is acidic and can damage clothing and skin.

During use, it is also important to be careful not to overuse the battery,

When the battery indicator light shows that the battery level is less than 1/3, please charge it in a timely manner.

Normally, it is necessary to regularly check whether the exhaust holes on the battery cover or the liquid filling bolts are unobstructed. If there is a blockage, the gas generated during battery operation cannot be discharged, and the electrolyte will expand and break the battery casing.

The battery will experience self discharge,

If not used for a long time, the battery power can easily be depleted. Therefore, the battery should be charged once a month.

3、 Water replenishment method

1. First, remove the battery, remove the connecting wire, and wipe it clean with a cloth. Then, unscrew the battery vent cover

2. Fill the battery with water using a syringe, and the liquid level should not exceed the upper mark or fall below the lower mark.

3. After adding water, screw on the battery vent cover.

4. Install the battery and use it in the car. If you need to use it urgently the next day, you can also charge it immediately; If it's not urgent

If using the car, wait for one night before charging, so that the electrolyte concentration inside the battery is consistent at all positions.

Water battery is a type of lead-acid battery. Due to the high liquid content inside the battery, it is commonly referred to as a "water battery". The liquid in a water battery is relatively easy to lose and needs to be replenished frequently, so it is also called a maintainable battery.

This type of battery is commonly used in cars and motorcycles.

1、 Maintenance points

Regularly checking the level of electrolyte in the battery and adding electrolyte in a timely manner is the most important daily maintenance step. During the charging and discharging process of a battery, the water in the electrolyte will gradually decrease due to electrolysis and evaporation, resulting in a decrease in the electrolyte level. If not replenished in a timely manner, it may shorten the service life of the battery. Distilled water should be replenished in a timely manner, and pure drinking water should not be used as a substitute. Because pure water contains multiple trace elements, it can have adverse effects on batteries.

Generally, there will be corresponding instructions on the battery cover, teaching you how to check the liquid level through the observation window.

When adding electrolyte, first unscrew the injection bolt on the battery cover, then shake the electrolyte well before adding it to the battery. Note that the electrolyte is acidic and can damage clothing and skin.

During use, it is also important to be careful not to overuse the battery,

When the battery indicator light shows that the battery level is less than 1/3, please charge it in a timely manner.

Normally, it is necessary to regularly check whether the exhaust holes on the battery cover or the liquid filling bolts are unobstructed. If there is a blockage, the gas generated during battery operation cannot be discharged, and the electrolyte will expand and break the battery casing.

The battery will experience self discharge,

If not used for a long time, the battery power can easily be depleted. Therefore, the battery should be charged once a month.

2、 Water replenishment method

1. First, remove the battery, remove the connecting wire, and wipe it clean with a cloth. Then, unscrew the battery vent cover

2. Fill the battery with water using a syringe, and the liquid level should not exceed the upper mark or fall below the lower mark.

3. After adding water, screw on the battery vent cover.

4. Install the battery and use it in the car. If you need to use it urgently the next day, you can also charge it immediately; If it's not urgent

If using the car, wait for one night before charging, so that the electrolyte concentration inside the battery is consistent at all positions.

Lithium Batteries ,Ensure Quality

Our lithium battery production line has a complete and scientific quality management system

Ensure the product quality of lithium batteries

Years of experience in producing lithium batteries

Focus on the production of lithium batteries

WE PROMISE TO MAKE EVERY LITHIUM BATTERY WELL

We have a comprehensive explanation of lithium batteries

QUALIFICATION CERTIFICATE

THE QUALITY OF COMPLIANCE PROVIDES GUARANTEE FOR CUSTOMERS

MULTIPLE QUALIFICATION CERTIFICATES TO ENSURE STABLE PRODUCT QUALITY

Providing customers with professional and assured products is the guarantee of our continuous progress.

Applicable brands of our products